SIERRA 800
I N S TA L L AT I O N I N S T R U C T I O N S
P A G E 5
RECESS INSTALLATION
FOOT RELEASE LEVER
The
K-Foot Release Lever
is an optional feature that makes it easier
to slightly rotate the
D-Pull Bar
in order to disengage the
L-Pull Bar
Locks
[Fig 4C] without bending over. Before installing, position the
K-Foot Release Lever
16" to 20" from the end of the
D-Pull Bar
on
the side closest to the
Operating Wand.
Attach the
K-Foot Release
Lever
to the
D-Pull Bar
using two
O-#6 x 3/8” (9mm) Phillips
Panhead Screws.
LEFT
RIGHT
B
L
C
P
P
B
L
C
J
D
K
Q
B
F
4A
4B
4C
6
Windy conditions may affect the performance of a retractable screen. Retract the
screen in windy circumstances, during inclement weather, when not needed to
support immediate ventilation or during prolong periods when not used.
INSTALLING SIDE RAILS
Install the
L-Pull Bar Locks
at the bottom of each
B-Inside Rail
. Be sure that
the
L-Pull Bar Locks
can engage the
D-Pull Bar
as shown [Fig 4C]. Slide both
C-Outside Rails
onto the tabs protruding from the
F and G-Cassette End Caps
[Fig 4A]
. Attach to jamb with
N-#8x3/4” (19mm) Panhead Screws
. Press
B-
Inside Rails
into
C-Outside Rails [Fig 4B]
with the shorter pile to the inside [Fig
4D] until they are evenly seated.
Using the height adjustment wheels on the
L-Pull Bar Locks
, adjust the height
to the appropriate level so they easily engage the
D-Pull Bar
. When correctly
adjusted, the latching and unlatching should be smooth and easy.
Shorter Pile
4D
See page 10 for Operating Wand Instructions.
INSTALL THE TENSION DEVICE
Go to page 10.
