8
3.2.2
Workflow
1.
The lid of the storage container is delivered from the factory with at least one of the
toggle catches (6) locked. Pull this toggle catch upwards and remove the screw hooks
from the lid.
2.
Model Storage Box 30 – 280: using the lifting grip (7), open the cover.
Model Storage Box 520: using suitable lifting devices and the lifting grip (7), open the
cover.
3.
Model Storage Box 220, 280 and 520: hold the lid with one hand and snap the lid sup-
port (9) into the bracket (10).
4.
The lid remains standing in its open state.
5.
Place the hazardous substance into the inner container.
Optional: Fill all cavities in the inner container with PE filler pads.
Caution
The hazardous substance placed into the container must not protrude beyond the edge
of the inner container.
6.
Model Storage Box 220, 280 and 520: firmly hold the lid with and remove the lid sup-
port (9) from the bracket (10).
7.
Model Storage Box 30 – 280: Close the lid using the lifting grip (7), place the screw hook
of the toggle catch (6) over the edge of the cover and then tighten the catch.
8.
Model Storage Box 520: Close the lid using suitable lifting devices and the lifting grip
(7), place the screw hook of the toggle catch (6) over the edge of the cover and then
tighten the catch.
