Genius JA338, Инструкции по использованию и установке

Страница: 6 / 20

ENGLISH
4
CREPUSCULAR-TIMED SWITCH BOARD
INSTRUCTIONS FOR USE - DIRECTIONS FOR INSTALLATION
1. GENERAL FEATURES
This crepuscular-timed switch board serves to control outside service lights. Four operating modes and a choice of
time settings enable you to control night lighting in a different way.
2. TECHNICAL SPECIFICATIONS
2.1 Hardware specifications
Power supply 230Vac - 50Hz
Max absorbed power 10VA
Outside lamps max. load 1500W
Operating ambient temperature - 20°C + 55°C
Protection fuse mains circuit
Rapid connector for decoding cards or 5-pin RP receivers.
Terminal board inputs 230 Vac mains power supply / Lighting up push-button /
Input for pulse from control unit flashing lamp.
Terminal board outputs 230 Vac 1500W max outside lights
2.2 Operating parameters
Logic 4 Operating modes
Outside lights lighting up time programmable from 5 seconds to 10 minutes
Light sensor sensitivity adjustable with trimmer
3. BOARD LAY-OUT (fig.1)
F1 Fuse F1 5x20 250mA/250V (mains circuit)
TF1 Transformer
FT1 Light sensor
TR1 Trimmer for adjusting sensitivity of light sensor
LD1 Light sensor control LED
J1 230VAC power supply input/output terminal board
J2 Rapid connector for decoding cards/5-pin RP receivers
J3 Lighting up push-button terminal board
DS1 Programming microswitches
Fig. 1
L N NO C (L)
-
+
1 2 3 4 5 6 7 8
ON
OFF
T - 0.25A
F1
TF1
J1
J3
J2
FT1
TR1
DS1
LD1