Genius G1-50X4G, Руководство пользователя

Страница: 4 / 6

- 5 - - 6 -
INPUT WIRING DIAGRAM
Low level input: These are driven by the line output of your in dash radio or
intermediate signal processor, Separate Left and Right signals can be applied for
Stereo or Mono operation but both inputs must be driven with the same signal for
proper Bridged operation. If only mono signal is available, a "Y" adapter is
required.
STEREO MODE
Note that the four speakers have been connected to the four terminal following the (+)
and (-) graphic. Your speaker terminals may be marked (+) and (-) or there may be a red
dot by one terminal which means the same as (+).
Connecting the speakers in this manner ensures that the two speaker cones will move in
and out together according to the original recording. If one of the two speakers is
reversed, stereo imaging and bass response will be degraded.
CH1
CH3
CH2
CH4
BRIDGED MODE
SPEAKER
2~4 Ohm
SPEAKER
2~4 Ohm
SPEAKER
4~8 Ohm
SPEAKER
4~8 Ohm
SPEAKER
2~4 Ohm
SPEAKER
2~4 Ohm
MODE
4CH 2CH
GAIN
MIN MAX
CH2 CH4
INPUT
LPF
50Hz 250Hz
HPF
120Hz 3KHz
GAIN
MIN MAX
LPF
50Hz 250Hz
HPF
120Hz 3KHz
CH1 CH3
CH1/CH2 CH3/CH4
PWR / PRT
HPF
FLAT
LPF
CROSSOVER
12dB
BASS BOOST
6dB
0dB 0dB
BASS BOOST
6dB
12dB LPF
FLAT
HPF
CROSSOVER
G1-50x4G
CH1
CH4 CH3
BRIDGED
BRIDGED
CH2
FUSES
+12V REM GND
G1-50x4G
CH1
CH4 CH3
BRIDGED
BRIDGED
CH2
FUSES
+12V REM GND
G1-50x4G