![Genius G-Cross3W Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/genius/g-cross3w/g-cross3w_manual_2212767003.webp)
CONTROLS,
INDICATORS AND TERMINALS
7.LEFT/RIGHT REAR CHANNEL SIGNAL INPUTS
To be connected to the rear channel output of the source unit, BUT MAKE SURE THAT THE PARALLEL
INPUT SWITCH IS AT THE "OUT" POSITION.
8.LEFT/RIGHT MIXED IN/OUT TERMINALS
As input Terminal: To be connected to the subwoofer output of the source unit.
As output Terminal: To be connected to the front channel input terminal of another electronic cross-over
in a multi-crossover system.
9.FRONT CHANNEL HIGH-PASS FREQUENCY SELECTOR
For selection of front channel high-pass crossover frequency between 25Hz and 400Hz [or 500Hz and
8KHz when its frequency multiplier is "
X
20" position].
10.REAR CHANNEL HIGH-PASS FREQUENCY SELECTOR
For selection of rear channel high-pass crossover frequency between 25Hz and 400Hz.
11.FRONT CHANNEL HIGH-PASS FREQUENCY MULTIPLIER
Positioning this switch at the "
X
20" position changes the range of selectable crossover frequency for the
front channel high-pass from 25Hz-400Hz to 500Hz-8KHz.
12
.
SUBWOOFER FREQUENCY SELECTOR
For selection of the low-pass crossover frequency for the subwoofer channel between 25Hz and 400Hz.
13
.
BASS-SHAPER BOOST SWITCH
When activated, this circuit provides a single octave boost of 18dB at 45Hz to equalize the woofer
enclosure.
14
.
PHASE INVERTER
Positioning the switch to the 180 position shifts the subwoofer outputs signals 180 degrees
"
out
-of
"
phase relative to the front and rear output signals.
15
.
SUBWOOFER STEREO/ MONO SWITCH
For selection of stereo or mono mode subwoofer output.
16
.
FRONT CHANNEL OUTPUT LEVEL CONTROL
For adjusting the front channel output signal level.
17
.
LEFT/RIGHT FRONT CHANNEL OUTPUT TERMINALS
To be connected to the front channel amplifier left /right inputs.
18
.
REAR CHANNEL OUTPUT LEVEL CONTROL
For adjusting the rear channel output signal level.
19
.
LEFT /RIGHT REAR CHANNEL OUTPUT TERMINALS
To be connected to the rear channel amplifier left /right inputs.
20.
SUBWOOFER OUTPUT LEVEL CONTROL
For adjusting the subwoofer channel output signal level.
21
.
LEFT /RIGHT SUBWOOFER OUTPUT TERMINALS
To be connected to the subwoofer channel amplifier left /right inputs.
22.
SUBWOOFER OUTPUT LEVEL REMOTE CONTROL TERMINAL
To be connected to remote control for exclusive maneuver of the subwoofer output level, and the
subwoofer output level control on the unit (24
"
above) is by-passed.
AND YOUR MOBILE AUDIO SYSTEM
LEFT
RIGHT
A
B
FRONT
POWER AMPLIFIER
A
REAR
POWER AMPLIFIER
SUBWOOFER
POWER AMPLIFIER-BRIDGEO MONO
MOBILE ELECTRONIC CROSSOVER
A
SPEAKER CONNECTIONS
FOR USE IN MONO MODE
RIGHT
RIGHT
LEFT
LEFT
A
B
FRONT
OUTPUT
Figure 2: Four-Channel "Bi-Amp" System(Stereo Front/Rear)
• •••• •• •• •• •• •• •• •
-3-
-4-
Содержание G-Cross3W
Страница 1: ......