ENGLISH
1
Hardware Installation
1.
Install two AA batteries each into the mouse and keyboard.
2.
Plug in the USB receiver to a USB port of your PC.
3.
Plug the Mic in & Speaker out connector to your PC.
4.
Turn on your PC.
Software Installation
1.
Place your CD driver in your PC drive for software installation.
2.
Follow the instruction on the screen to finish the software installation.
3.
For “HELP with the Genius driver, click on the icon found on the right
hand side of the screen.
Replace Batteries
1.
If the keyboard does not work properly, then the batteries have lost their
charge, so please replace them.
2.
If the mouse’s battery power is low, the power indicator will brighten
when you are moving the mouse.
Warning:
Do not mix or use different types of batteries at the same time.
ID Channel Setting
The channel ID is factory preset. The green LED (data transmission indicator)
will be lit constantly when the wireless device is in normal operation. In case
your wireless devices do not work, please reset the ID channel by:
