background image

ENG

TYPE SPECIFICATIONS

TECHNICAL SPECIFICATIONS 

· Battery 3V (CR2450)

· Transmitting frequency: 433MHz

· Transmitting power: 10 mW

· Operating temperature: -10°C ÷ 50°C

· Transmission distance: 200m open office, 

35m on two walls

OPERATING INSTRUCTIONS

Warning: to ensure long transmitter life, do not expose to 

moisture or shocks. 
When using transmitter, if emission distance is obviously too 

short or less sensitive than normal, please replace battery. 

Dispose of used batteries appropriately.

MATCHING AND SETTING UP TUBULAR MOTOR 

The matching operations between emitter and tubular motor are 

detailed in each motor instructions.
During setting, the time between two operations must be shorter 

than 4s, otherwise the device will quit the setting program.

Motors powered by  electrical grid either directly or through a power 

supply unit contain a buzzer.  

A beep sounds to confirm each step in programming. When the 

power supply is applied, the buzzer emits a long sound confirming 

connection.  
Instead, each stage in programming of battery-operated motors is 

confirmed by motor turning briefly forward and back.  

Power on

Beep once  

(or motor turning 

briefly forward 

and back)

Set up is ok. 

The up button controls 

the motor clockwise 

Set up is ok. 

The down button 

controls the motor 

clockwise 

Beep once  

(or motor turning 

briefly forward 

and back)

P2X1

P2X1

UpX1

DownX1

OK

OK

Beep once  

(or motor turning 

briefly forward 

and back)

Beep once  

(or motor turning 

briefly forward 

and back))

Up button 

Stop button 
Down button 

Back

P1- Channel 

set button 

Setting button

P1+ Channel set 

button

SELECTING VALID CHANNELS 

(In setting mode, press the up 

or down button so you can quit 

quickly; reset if you want to 

change the valid channels)

C

P1+ button 

+

 

P1- button)×1 

P1+ button 

+

 P1- 

button, hold  

The screen  

will display “C” 

The screen will 

display  “15” 

Press P1+ button or P1- button, 

selecting the channel (channel 

1 to channel 15) you need  

StopX1

The screen will 

display “o” 

Setting is ok

OK

15 channel emitter specifications

CRH-15-00

Отзывы: