2. Click on the Smart Touch icon
located on the Windows system
tray.
3. Click [Calibrate] from the menu that pops up.
4. The scanner pulls the calibration sheet through the scanner, which
completes this scanner calibration.
C
C
l
l
e
e
a
a
n
n
i
i
n
n
g
g
t
t
h
h
e
e
S
S
c
c
a
a
n
n
n
n
e
e
r
r
When you use this scanner for the very first time after installation, you are
suggested to clean the scanner before use.
If unusual dots or lines are found in your scanned image, it is very likely that dust
particles or other foreign objects have been brought inside the scanner. You may
clean the scanner to rectify the problem.
The following describes how to clean the scanner:
1. Insert the special cleaning paper into the page feed slot of the scanner.
Caution
Do use the cleaning paper included in our package
box. Remember to replace the cleaning paper in a
safe and clean place when you finish using it.
Do not use anything other than our cleaning paper to
clean your scanner. Using other sheet will influence
the scan quality or even lead to scanner malfunction.
2. Click on the Smart Touch icon
located on the Windows system
tray.
3. Click [Clean] from the menu that pops up.
4. The scanner pulls the cleaning paper through the scanner, which
completes this scanner cleaning.
Usage & Maintenance Tips
To keep your scanner working smoothly, take a moment to review the following
maintenance tips.
Genius Scanner
15