The following selections are available:
Hardware
Configuration
To show the hardware configuration
such as adapterID, I/O address, and
IRQ
Transmit /
Receive Test
When the product transmits or
receives a packet in the network, the
transmit or receive counter will be
increased.
Cable Test
Reconfiguration
To check the -cable status. If the
cable is not connected properly,
cable fault signal will appear on
screen.
To reconfigure your adapter if you
need to.
Chapter 3 Driver Installation
The GE200011 series needs software driver programs to
work with network operating systems. These programs are
loaded on the diskette contained in the GE200011 series
package.
Before intalling the driver programs, please make sure the
following points:
The LAN adapter is configured properly either by software
or by jumper setting.
All network cables are well connected and the right cable
is used.
The driver diskette contains drivers for most major network
environments including Novell’s NetWare,
Personal
NetWare, Microsoft’s L A N M a n a g e r , W i n d o w s f o r
W orkgroups, and Packet driver for TCP/IP.
Detailed
installation steps of each driver program are described in the
” READ. ME” file in the related sub-directories.
2-6
3-1
