4 |
P a g e
Use the projector as a Bluetooth speaker
1.
Press and hold the PLAY/PAUSE button to turn on the bluetooth, and there is a
voice prompting “Bluetoo
t
h Mode”
when it is powered on.
2.
Turn ON the Bluetooth on your smartphone, and set it to search for new devices.
3.
Look and select
the “
galaxy starship
” from the list of devices
.
4.
Once it is paired, you will hear a voice prompt “
Bluetooth pairing suc
cessfully”
.
Manual control mode
If you have difficulty pairing this starship projector to your Genio APP, you can still
use it manually without the need of Wi-Fi pairing. Simply wait for the blue light to
stop blinking (can take up to 3 minutes), then this projector can be operated
manually with the onboard buttons.
To prepare this projector for pairing with the APP, simply press and hold the Power
button until the projector light starts to blink Blue rapidly, the projector is now ready
to be paired with Genio App, and if no action is taken, after 3 minutes it will stop
blinking, once it has stopped blinking it will return to manual control mode.
Connection Preparation for it to be used with the Genio App.
Your phone must be connected to 2.4Ghz Wi-Fi and not to the 5GHz network. To
verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the
Settings
menu and click on
Wi-Fi.
In this menu, you will see all the detectable networks in
your area. Locate the SSID (the name of your network) and ensure that the Wi-Fi SSID
does not end with a 5G / 5GHz. Refer to the example below.