I003975 Genio Smart Wi‐Fi LED Stick Light 6pc
TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE REFERENCE
FOR ANY QUESTIONS OR TROUBLESHOOTING PLEASE VISIT
www.mirabellagenio.net.au/faqs
We recommend that the set be tested prior to being set up in the desired location
SAFETY INFORMATION
:
•
Remove set from the packaging before connecting to power supply.
• Before using or re‐using the set, inspect carefully
• Use only with transformer supplied
• Do not connect set electrically to another set
• Do not use any set which has: – cut, damaged, or frayed wire insulation, cracks in lamp‐holders,
loose connections or exposed wires
The LED bulb is not replaceable
Note: When connecting, please ensure the arrows are aligned with one another
Included in the Kit
x12
x 12
x6
x1
Installation
Screws
Power Adaptor
Installation clips
Extension cables
Rubber end cap
Link and connect the stick light
It is recommended you connect the stick light according to the ABCD marking. A‐A, B‐B, C‐C D‐D etc, and cover the
end with the rubber end cap.