Genie ZD49IR, Руководство пользователя

Страница: 23 / 24

DNR TRUE DAY & NIGHT COLOUR CAMERA
DNR TRUE DAY & NIGHT COLOUR CAMERA
-22-
PROBLEM
Northing appears on
the screen.
☞
Check the power cable, power supply output and video
connection between the camera and monitor.
☞
Are the camera lens or the lens glass dirty?
Clean the lens /glass with a soft clean cloth.
☞
Adjust the monitor controls, as required.
☞
If the camera is facing a very strong light, change the
camera position.
☞
Adjust the lens focus.
☞
Adjust the contrast control of the monitor.
☞
If there is an intermediate device, correctly set the 75 / Hi-z.
☞
Has MOTION DET been set to ON in the menu?
☞
Has MD AREA been properly defined?
☞
Make sure that the camera isn't facing direct sunlight or
fluorescent lighting. If necessary, change the camera
position.
☞
Check the settings in WHITE BALANCE menu.
☞
Check that the AGC setting in the EXPOSURE menu isn't
set to OFF.
☞
Check the EXPOSURE menu and make sure SHUTTER is
set to ESC.
☞
Check the camera is correctly connected to an appropriate
regulated power source.
The image on the
screen is dim.
The camera is not
working properly
and the surface of
the camera is hot.
The image on the
screen is dark.
Motion Detection
function is not activated.
The colour of the
picture is not correct.
The image on the
screen flickers.
The SENS-UP does
not work.
POSSIBLE CAUSE