Genie Z-60/34 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

background image

Operator's Manual

Seventh Edition · First Printing

Part No. 133083

Z-60/34

51

Maintenance

Check the Batteries

Proper battery condition is essential to good
engine performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in engine component
damage and hazardous conditions.

Electrocution hazard. Contact with hot or live
circuits may result in death or serious injury.
Remove all rings, watches and other jewelry.

Bodily injury hazard. Batteries contain acid.
Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda
and water.

1 Put on protective clothing and eye wear.

2 Be sure that the battery cable connections are

tight and free of corrosion.

3 Be sure that the battery hold-down bracket is

secure.

Note: Adding terminal protectors and a corrosion
preventative sealant will help eliminate corrosion
on the battery terminals and cables.

Check the Tire Pressure

Tip-over hazard. An over-inflated tire can
explode which may compromise machine
stability and cause the machine to tip over.

Tip-over hazard. The use of temporary flat tire
repair products may lead to tire failure which
could compromise machine stability and
cause the machine to tip over.

Bodily injury hazard. An over-inflated tire can
explode and may cause death or serious
injury.

Note: This procedure does not need to be
performed on machines equipped with foam-filled
tires.

1 Check each tire with an air pressure gauge and

add air as needed.

Tire pressure

4.5 bar

High flotation tire pressure

4.5 bar

«
...
51
52
53
54
55
...
»

Содержание Z-60/34

























































Отзывы:

Нет отзывов

Похожие инструкции для Z-60/34

Genie GS-2668DC

Бренд: Terex Страницы: 48

Бренд: Mohawk Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды