Genie Z-33/18 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 50

Genie Z-33/18 Скачать руководство пользователя страница 42

40

Z-33/18

Part No. 1257143

First edition • First Printing

Operator's Manual

Transport and Lifting Instructions

Securing to Truck or Trailer for

Transit

Always use the turntable rotation lock pin each
time the machine is transported.

1

1 Turntable rotation lock pin

Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.

Securing the Chassis

Use chains of ample load capacity.
Use a minimum of 4 chains or straps.
Adjust the rigging to prevent damage to the
chains.
For diagram, refer to the Lifting Instructions.

Securing the Platform – Z-33/18

Make sure the platform is in the stowed position.
Secure the platform with a nylon strap placed over
the platform mount near the extension boom end
(see below). Do not use excessive downward force
when securing the boom section.

Z-33/18

1258499 A

Genie Part Number:

1258499 A

ECN 14001BU

Colors:
Black: Rules; Text; Illustrations

White: Background

Corner Radius: 0.125"
Dimensions (h x w): 3.5 x 5.5

Supplier: This artwork may not be modified or
altered without author approval.

This artwork is the property of Genie Industries
and must be surrendered upon request.
Copyright © by Genie Industries
All rights reserved

Material Specifications and
color to comply with
GES1318

«
...
40
41
42
43
44
...
»

Содержание Z-33/18



















































Отзывы:

Нет отзывов