Quick Start Guide
2MP IP Lite IR Varifocal Bullet Camera with 2.8-12mm Lens
10
Direct Access Through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data Port: 9008
You can use the above default settings when you log into the camera for the first time.
1. Set the IP address of the PC and make sure the network segment should be as the
same as the default settings of IP-CAM. Open the network and share center. Click
“Local Area Connection” to pop up the following window. Select “Properties” and then
select Internet protocol according to the actual situation (for example: IPv4). Next, click
“Properties” button to set the network of the PC.
2. Open the IE browser and input the default address of IP-CAM and confirm. The IE
browser will download Active X control automatically.
3. After the Active X control is downloaded, the login dialog box will pop up.
4. Input the default username and password and then enter to view.
