8
Before you start, please make sure that the wall or ceiling is strong enough
to withstand 3x the weight of the camera. Please install the camera in the dry
environment.
1. Attach the drill template to the place where you want to fix the camera and
then drill screw holes according to the drill template.
2. Route and connect the cables.
3. Secure the mounting base with the camera to the wall with screws as shown
below.
4. Bracket adjustment. Before adjustment, preview the image of the camera on a
monitor and then loosen the fixed ring or screws to adjust the view angle of the
camera.
5. Focus and zoom adjustment (If the model you get is fixed lens or motorised
lens, please skip this step). Remove the cover and then adjust the focus and
zoom levers to get a clear image. Finally, tighten the screws and the lens cover.
1
2
3
Rubber Plug
Rubber Plug
Fixed Ring
Pan 360°
Pan 360°
Fixed Screws
Tilt 90°C
360°C Rotation
Lens Cover
Zoom
Focus
Tilt 90°
3.0 Product Installation
