Operator's Manual
Second Edition • Second Printing
4
Genie TMZ-50/30
Part No. 114255
Bodily Injury Hazard
Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Models with engines: Always operate the machine
in a well-ventilated area to avoid carbon monoxide
poisoning.
Collision Hazards
Be aware of boom position when rotating the
turntable.
The machine must be on a level surface or
secured before releasing the parking brake.
Use the parking brake to control the speed of the
machine when pushing a machine that is not
attached to a tow vehicle.
Check the work area for overhead obstructions or
other possible hazards.
It is recommended that operators wear an
approved hard hat when operating the machine.
Do not lower the boom unless the area below is
clear of personnel and obstructions.
Do not operate a boom in the path of any crane
unless the controls of the crane have been locked
out and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating the
machine.
SAFETY RULES
Component Damage Hazards
Do not use the machine as a ground for welding.
Do not fully lower the booms unless the booms are
aligned with the tongue. The booms must be
lowered onto the boom rests.
Do not use any battery or charger greater than
12V to jump-start the engine.
Lifting Hazards
Use proper lifting techniques to move the
machine.
Use proper lifting techniques when installing or
removing the platform.
800-610-4101
ActionRental.com
