Genie Super-Straddle, Руководство оператора, Страница: 24 / 27

Operator's Manual Third Edition • First Printing
Operating Instructions
22 Super-Straddle Part No. 1298031GT
11 Adjust the outrigger screw jacks so that the
pads are in firm contact with the ground and
the Super-Straddle casters are slightly off the
ground. Use the bubble level on the Genie
AWP to level the straddle platform. The bubble
level is on the base of the AWP, below the
interlock display.
12 Place the ladder on
the Super-Straddle
directly below the
basket entry. Pull
the snap pins on
each side of the
ladder to lower the
bottom step.
13 Operate the Genie AWP.
Lowering the Straddle Platform
1 Fully lower the Genie AWP.
2 Slightly raise the outriggers.
3 Carefully push the Super-Straddle away from
the straddle object. Return the machine to a
firm level surface.
4 Remove the frame retaining pins from each
corner of the Super-Straddle. The holes must
be aligned to remove the pins. Use the winch
to align the holes if needed.
5 Turn the winch handle to lower the straddle
platform. It may be necessary to lower one end
frame part way and then lower the other end.
6 Continue turning the winch handles until both
end frames are lowered.
Ladder Storage
Store the ladder on
the base frame cross
membrane.
To protect the safety and operating instruction
decals from scuffs and scratches, do not store
ladder over either end frame.
After Each Use
Select a safe storage location - firm level surface,
weather protected, clear of obstruction and traffic.
Coil cord can be hooked to the end frame for
storage.