User Manual
IP65 200m Analogue Wireless RF Data Transceiver
16
6.15 Tamper / Third Channel - Local Tamper Switch
Enable or disable local tamper switch. This does not affect the local switches state being
transmitted to other RF200D interfaces. The options are as follows:
6.16 Tamper / Third Channel - Status Update Monitoring
Enable or disable status update monitoring. When enabled any missing status updates
generate a tamper fault and flash the tamper LED twice.
6.17 Tamper / Third Channel - Relay Test
The RF200D has a build in relay test function. When the tamper and signal LED’s 5 & 6 are
flashing, pressing the right switch turns on the relay and signal LED 1.
6.18 Status Update Period
Enabling the status updates forces the RF200D to transmit its status at a given period
even if there are no input changes. If a receiving RF200D has its status update monitoring
enabled and there is a loss of signal a tamper fault will be generated.
