7
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1. Loosen the fixed screw to disassemble the camera.
2. Remove the cover from the dome to insert the SD card. Then, install the cover back
to the dome and fix it firmly with the screws. Please note that the cover should not be
installed unevenly. (Please skip this step if your camera has no micro SD card slot).
3. Attach the drill template to the place where you want to fix the camera and then drill
the screw holes and the cable hole on the wall according to the drill template.
4. Route and connect the cables. Then secure the mounting base to the ceiling or wall
with the screws provided.
5. Install the dome and enclosure to the mounting base and then adjust the dome to
obtain an optimum view angle. Finally, fix the camera with the fixed screw.
3.0 Installation
Fixed Screw
Mounting Base
Enclosure
Dome
Cover
