7
Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight
of the camera. Please install the camera in and under a dry environment.
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables.
3. Secure the mounting base with camera to the wall with the screws provided.
4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor
and then loosen the fixed ring to adjust the view angle of the camera.
5. Open the cover of the camera and then insert a micro SD card. After that, adjust Zoom
or Focus to obtain an optimum image (If the camera is fixed or motorised lens, please
skip this step). Before adjustment, preview the image of the camera on a monitor.
3.0 Installation
Rubber Plug
Fixed Ring
360° Pan
90° Tilt
Cover
Focus
Zoom
Insert a Micro
SD card
360° Rotation
6. Install the cover back to the
camera and fix it firmly with
the screws. (Note that the
cover should not be installed
unevenly).
