Move knob leftwards, LCD display :
PROTOCOL: PELCOP
，
Press
【
】
, buzzer rings, LCD display :
Setup SUCCESS
，
Move knob downwards, LCD display :
Baud Rate: 2400
，
Move knob rightwards, LCD display:
Baud Rate: 9600
，
Press
【
】
, buzzer rings, LCD display:
Setup SUCCESS
，
After Setup is completed, press
【
】
for 3 times to back to normal mode.
Note: To set the same protocol and baud rate for front device, Enter this screen
>Address
：
0-254
, Then set the protocol and baud rate.
3.2 Keyboard controller system parameter Setup
System parameters include password, restore default settings, key tone
ON/OFF, key ID Setup, keylock, etc. We will describe the Setup process by taking
restoring default settings and key lock as examples.
3.2.1 Restore default settings
In normal mode, press
【
】
for 3 sec, LCD display:
PASSWORD ----
，
Input password(default 8888), press
【
】
, LCD display
:
>PTZ Setup
，
Move knob downwards, LCD display : >
SYSTEM Setup
Press
【
】
, LCD display: >
SET PW
Move knob downwards, LCD display: >
DEFAULT
Press
【
】
, LCD respond:
SURE?
Press
【
】
again, buzzer rings, LCD display
:
Setup SUCCESS
1s
，
Restore default settings successfully(to abort the process, press
【
】
for 2
times to back to normal mode).
3.2.2 Keyboard controller lock ON/OFF
In normal mode, press
【
】
for 3sec, LCD display:
PASSWORD ----
，
Input password(default 8888), press
【
】
, LCD display:
>PTZ Setup
，
Move knob downwards, LCD display:
>SYSTEM Setup
,
Press
【
】
, LCD display: >
SET PW
,
Move knob upwards, LCD display: >
LOCK SET
,
3.2 Keyboard controller system parameter Setup
3.2.1 Restore default settings
3.2.2 Keyboard controller lock ON/OFF
13
