HDUBARTK-T User Manual
P
owe r Inpu t
V
ideo +
V
ideo -
G
roundin g
Video
Output
S
witc h
V
ide o LED
P
owe r LED
P
owe r Inpu t
V
ideo +
V
ideo -
G
roundin g
V
ide o Inpu t
S
witch
V
ide o LED
P
owe r LED
Right
View
Left View
Top View
T
op View
Right
View
Left View
RM Un it
SV
Unit
Panel Diagram
Installation Steps
Please check the following items before installation, if it is missing, please contact the dealer.
•
RM Unit
1pc
•
SV Unit
1pc
•
User Manual
1pc
Please follow installation steps as below:
1.
Turn off the power of all the related devices before the installation; otherwise the device would be
damaged;
2. Check if the any cable has been occupied by other device;
3. Connect corresponding ports of cameras and other related devices with Video BNC port of TX
unit;
4. Connect the grounding terminal of TX unit by bare grounding wire and a pair Ethernet cable;
5. Connect the grounding terminal of RX unit by bare grounding wire and a pair Ethernet cable;
6. Connect display device and BNC port of RX unit by coaxial cable;
7. Connect power ports of RX and TX units by power cable;
8. Check the installation and connection of equipments are correct and the equipments are working
properly, then power on system;
9. Make sure image displays and other devices are working.
Installation Methods
Indoor Wall-mounting
