Quick Start Guide
AHD, CVI, TVI and CVBS Active Video Balun - Receiver
3
Panel Diagram
Installation Steps
Please check the following items before installation.
If anything is missing, please contact dealer.
• 1x HDUBARTK-R
• 1x User Manual
Please follow the steps as below:
1. Turn off the power of all the related devices before the installation; otherwise
the device would be damaged.
2. Check if the any cable has been occupied by other device.
3. Connect corresponding ports of cameras and other related devices with Video
BNC port of TX unit.
4. Connect the grounding terminal of TX unit by bare grounding wire and a pair
Ethernet cable.
5. Connect the grounding terminal of RX unit by bare grounding wire and a pair
Ethernet cable.
6. Connect display device and BNC port of RX unit by coaxial cable.
7. Connect power ports of RX and TX units by power cable.
8. Check the installation and connection of equipments are correct and the
equipments are working properly, then power on system.
9. Make sure image displays and other devices are working.
Troubleshoot
Please find the following solution when the device doesn’t work:
• Reboot
• Adjust the switch when DVR works smoothly.
• There are 2 marks of 10X on unit. Right mark features high definition and
saturation.
