Express Wet & Dry Handheld GUV-04
Wet and dry handheld
Charging indicator light
3-in-1 switch:
- On/off (press )
- Bend handle (push forwards)
- Release dust container (pull backwards)
Handle
Pre-motor filter (hidden)
Filter cage
Dirt bin
Nozzle (for wet spills)
Crevice nozzle (for dry vacuuming)
Plug
Power cord
Charging base
Nozzle storage
Mains adapter
What’s wrong....
How to sort me out!
Want to know how to maintain your handheld
Please visit
thegenierange.co.uk
or call
0844 811 22 80
for advice
Place your handheld on the charging base. Blue indicator light will show
when charging
The battery is flat
Let the battery run until it stops. Place your handheld on charging
base to charge
The battery charge is getting weak
My handheld
will not work
properly
The filters are dirty
Remove the obstruction
The nozzle/crevice tool may be blocked
Clean the filters
The dirt bin is full
Empty the dirt bin
My handheld
will not pick
up dirt/water
The handheld switch is on
Take your handheld off the charging base. It is now ready for use
The battery is fully charged
Switch off your handheld
The mains adapter is not plugged in
Check if the plug and the mains adapter are fitted correctly
The charging
indicator light is
not lit during
charge
4
4
To charge your
handheld before
use, attach unit
to charging
base.
4
Remove your
handheld from
the charging
base to use.
The blue
charging
indicator will
illuminate.
The charging
indicator light remains
lit until your handheld
is fully charged. Initial
charge is 14-18
hours.
For dry
vacuuming, use
without an
attachment or use
with the long
crevice nozzle.
To pick up wet
spills, empty dirt
bin of dust
then replace.
Attach wet
nozzle.
To empty, pull 3-in-1
switch backwards to
release dirt bin.
Remove filter cage
by pulling tab.
For dirt, carefully
tap over a bin to
empty. For water
empty over a
sink.
Remove foam
filter from filter
cage, and tap over
a bin to remove
excess dirt.
Rinse cage
and filter under
warm running
water. Dry for at
least 24 hours.
Note: To put your handheld back together, refit filter and cage, ensure grooves in
the bottom of the dirt bin engage with the tabs at the bottom of the unit.
Note: When ‘max’ mark on the dirt bin is reached, your handheld
needs to be emptied.
Turn handheld
on by pressing
the on/off
switch ( )
Hold your
handheld firmly
with two hands;
one on the handle
and the other on
the dirt bin.
Slide 3-in-1
switch forward,
adjusting your
handheld into the
desired position
with the other
hand.
Release switch
until the handle
locks into
place.
Insert plug
into electrical
socket and
switch on.
Dry spill pick up
Wet spill pick up
Rinse dirt
bin with warm
water. Allow to dry
completely before
re-attaching to the
handheld.
IMPORTANT: The dirt bin must be emptied
and completely dry of wet spills before your
handheld is attached to the charging base.
!
IMPORTANT: The dirt bin must be emptied and completely dry of
wet spills before your handheld is attached to the charging base.
!
Angle your
handheld at 90°
above the spill
and turn on.
3
4
2
11
14
12
5
6
7
1
13
9
10
8
3
2
1
6
5
4
7
8
9
10
11
12
13
14
1
2
1
2
3
3
1
2
1
2
1
2
1
2
