Genie GTH-644 Скачать руководство пользователя

Страница: 7 / 64

ROUGH TERRAIN FORK LIFT SAFETY

SAFETY

1 - 5

1. Safety must always be the operator's most important concern.

2. This machine must only be operated by trained personnel, who have demonstrated

their ability to do so safely.

3. Comply with the requirements of current Occupational Safety and Health

Administration (OSHA) standards, including 29CFR1910.178; and the American
National Standards Institute (ANSI) B56.6 latest edition.

4. Read and Understand all Decals and Warnings.

5. Read and Understand the Rating Chart.

6. Know that the machine can safety lift each load before attempting to lift.

These are general safety rules, which must be followed. You are also required to read
and understand the Operator's Manual as there are instructions, which are more
detailed specific to this machine.

TRAINING AND KNOWLEDGE

Содержание GTH-644

































































Результаты поиска

Содержание GTH-644

Отзывы:

Похожие инструкции для GTH-644

Бренды по названию

Популярные бренды

Genie GTH-644, Руководство оператора

Результаты поиска

Содержание GTH-644

Отзывы:

Похожие инструкции для GTH-644

Бренды по названию

Популярные бренды