9
4.0 Testing The Detector
Wait one minute after applying power and warm up time.
Conduct testing with the protected area cleared of all people.
Walk Test
1. Remove front cover.
2. Set LED to ON position.
3. Reassemble the front cover.
4. Start walking slowly across the detection zone.
5. Observe that the LED lights whenever motion is detected.
6. Allow 5 sec. between each test for the detector to stabilise.
7. After the walk test is completed, you can set the LED to OFF position.
NOTE:
Walk tests should be conducted, at least once a year, to verify proper operation of the
detector.
