Quick Start Guide
Contactless Request To Exit Button
4
6. Functions
7. DIP Switch Setting
• As you put your hand near the exit button the capacitive technology will
trigger the device without the need to actually touch it. The colour of the exit
button will change from blue to green in colour when triggered. At the same
time, the relay inside the exit button device will trigger for 1 second and the
built-in buzzer will beep once.
• To adjust the door open duration, please power off the exit button. Change
the DIP Switch setting to alter the door open duration from the table below,
adjustable from 1 to 15 seconds, re-apply power again for the change to take
place.
• Support mechanical override.
• Support an external device/switch to trigger the unit.
• Remote Control is an option (Special order item)
1
ON
1
No. 1,2,3,4 are used for adjusting door open duration.
ON = Valid
OFF = Invalid
Door open duration = To add all the ON position
switch numbers
Example:
If we set 1 and 4 to “ON”, the door open during will be:
1+8=9 the decimal number is 9 seconds (decimal
number)
*Setting all DIP switch to OFF position means door
duration = 1 sec.
OFF
0
2
ON
2
OFF
0
3
ON
4
OFF
0
4 ON
8
OFF
0
5 ON
Turn off (buzzer)
Turn off the buzzer
OFF
Turn on (buzzer)
Turn on the buzzer (default)
6 ON
N/A
N/A
OFF
N/A
7
ON
N/A
N/A
OFF
N/A
8 ON
Trigger distance
(near)
2~3cm
OFF
Trigger distance
(far)
5cm (default)
NOTE:
Change the DIP Switch, please power off for changes to take place.
