Genie BDVR-16, Руководство пользователя

Страница: 35 / 104

BDVR Manual 34 Version 1.2
5. Continuous Recording (Normal Recording)
The DVR comes with certain preset settings from the factory. Therefore, once the DVR
is installed immediate recording is possible by pressing the record button. By default,
audio alarm and motion recording are set to OFF.
１
. Use the directional buttons [ ] to select “RECORD” menu. Then, press the [ENTER]
button to display “RECORD”.
２ . Use the directional buttons [
] to select the Camera you wish to configure.
３ . Use the [-, +] buttons to change values.
ITEM ADJUSTMENT
USE
y
Enable or Disable Recording on each camera.
QUALITY
y
Specify the record picture quality for each camera.
ULTRA Æ SUPER Æ HIGH Æ MIDDLE Æ LOW
RATE
y
Select the recording speed for each camera.
: Recording resolutions change between Frame, Field and CIF.
<Refer to
System
>
AUDIO
y Select Audio recording: ON or OFF.
The audio data is always recorded in real time unlike the video data which could be
recorded in various modes, including real time. There may be a slight delay in
synchronisation of the audio to video data.
MOTION
y
Select Motion Recording ON or OFF. Camera does not record under normal
conditions. See the Motion Recording section.
Note
: Press the [
MENU]
button on the first line of each item to apply the setting for the remaining
channels.