1. Plug in the Door Controller Module (DCM)
to power it up. A Red Light on the DCM
will turn on.
1.
2. Pull the battery tab out of the Door Position
Sensor (DPS).
2.
3. Once battery tab is removed from the DPS, a blue
LED will flash rapidly. This is the DPS searching to
pair with the DCM via Bluetooth.
The DPS will be factory paired with the number one
button on the DCM. To change default button see
instructions for DPS pair/unpair in the online manual.
http://www.GenieCompany.com/AladdinConnect
3.
4.
4. A solid blue LED will illuminate on the number
one button of the DCM indicating that it is paired
to the DPS.
• If the button LED turns Red, unplug the DCM and
plug it back in. The blue LED should illuminate.
• If the LED remains RED, contact customer service
at 1-800-599-4995.
Activating and Pairing the DCM & DPS: