Genie CCTV W70MDIR, Руководство пользователя

Страница: 8 / 12

Vandal Resistant IR Dome Camera
8
Installation
Before Installation
Read the cautions before installation:
1. Make sure the installation location can support 5 times the total weight of the dome camera.
2. Make sure the cable doesn’t get jammed inappropriately or allow the cable insulation to get damaged
during installation. This may result in a malfunction or a fire hazard.
3. Make sure that nobody is beneath the installation location.
Installing the Camera
The installation process is illustrated below:
Step 1
Place the dielectric paper on the wall / ceiling (this is to protect the camera from damage by conducted
currents). Then, fix the camera base to the wall / ceiling with the 3 screws provided.
*Pay attention to the cable trough. Point it in the direction of the power supply if cables exit there.
Step 2
Attach the camera body to the base.
Step 3
Rotate the eyeball to set the monitoring direction.
Step 4
Tighten the connecting ring to finish the installation.
Cable Trough
Cautions for Installation:
1. Allow the cable to pass through the hole in the middle before mounting the camera to the base.
2. If passing through the side, the cable must be put in the cable trough first before the camera is
mounted.