■
CAMERA MODULE LAYOUT
■
INSTALLATION
1) Dome Base Mounting
- Open the dome cover by unscrewing the decoration ring
- Mount the base of camera to a sturdy surface using 4 screws and
the 4 premade holes on the base of the dome.
2) Power Connect & Monitor Impedance
- Use a DC12V/500mA (PSU500) regulated power supply.
- To avoid fire or shock hazard, always use a CE listed power supply.
- Set the monitor impedance switch to 75
Ω
. Check the impedance
switch if the image appears blurred.
3) Camera Module Adjustment
- Loosen the screws that secure the 3-Axis camera bracket and
adjust the cameras focus and angle of view
- Make sure to retighten these camera bracket screws.
4) Dome Cover Mounting
- Tighten the screws that secure the polycarbonate bubble
- Replace the dome cover to the base and tighten the ring.
■
CABLE CONNECTION
LENS
PAN BRACKET
TILT BRACKET
POWER
VIDEO
(unit:mm)
32.0
28.0
32.0
28.0
46.4
1.2
4.0
16.4
28.0
FOCUS
HANDLE
ZOOM
HANDLE
VIDEO
DC12V
GND
Dome Base
Decoration Ring
Surface
Mount Bracket
Security Screws
with "O" Ring
Dome Cover
Digital Day/Night
Vandal Resistant
Dome Camera
