■
How to Use the Camera
■
How to Use the Camera
■
How to Use the Camera
■
How to Use the Camera
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
①
When the colour temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
②
When the ambient illumination of the subject is low.
③
If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
●
AUTO
: This camera has a function which automatically changes to the
appropriate mode according to lighting levels. To set up the switching
time for the AUTO mode press the SET button.
DAY&NIGHT
●
COLOR
: The picture is displayed in colour.
●
B/W
: The picture is always displayed in black and white.
●
FREEZE
: View still pictures.
- OFF / ON selectable
●
FLIP
: OFF / HORIZ / VERT / BOTH selectable
●
SHARPNESS
: The outline of the video image becomes cleaner and
more distinctive as the level of SHARPNESS increases. If the level gose
up excessively, however, it may affect the video image and generate noise.
- The available range of level is -8 ~ 8
●
COLOR GAIN
: To control the colour level in the video.
- The available range of level is -8 ~ 8
●
GAMMA
: Users can change the gamma setting between 25 and100
●
FOCUS
: To adjust the lens focus.
BOTH
VERT
HORIZ
OFF
SPECIAL
When the SETUP menu screen is displayed, select 'SPECIAL' by using
the Up and Down buttons so that the arrow indicates 'SPECIAL'.
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..
EXIT MENU.
NORMAL
MIDDLE
ATW
AUTO..
■
Specifications
ITEM
Image Sensor
Signal processing
Transfer Format
Sync. System
Effective Pixels
Dynamic Range
Horizontal Resolution
Min. Illumination
Day & Night
White Balance
WB Range
Shutter Speed
Sens-up
Privacy Masking
AGC
Image Flip
Camera ID
S/N Ratio
Video Output
OSD
Operating Humidity
Operating Temp.
Weatherproof
Weight
Power Consumption
PIXIM 1/3" High Sensitivity Digital Sensor
17-bit Digital Signal Processing
Progressive with Segmented Frames
Internal
758(H) x 540(V)
120dB(Max), 102dB(Typical)
690TVL Effective
0.1Lux
AUTO / COLOR / B/W
ATW / AWB / INDOOR / OUTDOOR / MANUAL
2000
˚
K~11,000
˚
K
up to 1/30, 720 sec
AUTO / OFF (Selectable x2 ~ x32)
12 Zones
OFF / LOW / MEDIUM / HIGH
OFF / HORIZ / VERT / BOTH
ON / OFF
More than 50dB
Composite video output 75 ohm terminated
Built-in
30% ~ 90% RH
-10
˚
C to 50
˚
IP66
Appro. 230g
12VDC (Max.150mA)
SPEC.
SETUP
PRESETS
EXPOSURE..
WDR
WHITE BALANCE
DAY&NIGHT
IMAGE ADJ..
SPECIAL..
NORMAL
MIDDLE
ATW
AUTO..
IMAGE ADJ.
When the SETUP menu screen is displayed, select 'IMAGE ADJ.' using
the Up and Down buttons.
IMAGE
FREEZE
FLIP
SHARPNESS
COLOR GAIN
GAMMA
FOCUS..
PREVIOUS PAGE..
OFF
OFF
-8
0
8
0
-8
8
25
45
100
FOCUS DETECTOR
FOCUS METER
SET FOCUS REGION..
PREVIOUS PAGE..
88
SET FOCUS REGION
●
DZOOM
: Digital P/T/Z are used to create a zoom lens effect.
Zoom Factor (1X to 4X), Pan (
±
100%, center of image can be moved
to left and right edges of screen), Tilt (
±
100%, center of image can be
moved to top and bottom edges of screen)
●
MOTION
: This product has a feature that allows you to observe
movements of objects in on the screen, hence a single individual can
conduct supervision efficiently.
The camera detects an object's movement by sensing disparity of
outline, and level of brightness and colour.
DZOOM
ZOOM
PAN
TILT
PREVIOUS PAGE..
1
0
0
-100
100
1
4
-100
100
VIDEO STANDARD
VIDEO SELECT
VIDEO LEVEL
SYNC LVL
BURST LVL
COLOR BAR
PREVIOUS PAGE..
0
0
OFF
PAL
80
110
150
-16
15
-16
15
●
CAMERA ID
: User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
ㆍ
You can choose the ON and OFF with the selector. If you select ON,
the entered camera ID is displayed at the selected position in the video
picture (normal operation).
ㆍ
Please select the setup button while in On mode.
ㆍ
Select the desired position with the selector.
①
Move the cursor to the letter required by using the Set-Up button.
②
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the LEFT and
RIGHT buttons.
③
Repeat the above steps until the ID is complete.
CAMERA ID
ID
POSITION
PREVIOUS PAGE..
CAM-001
UP-LEFT
CAMERA ID
ID
POSITION
PREVIOUS PAGE..
CAM-001
UP-LEFT
SPECIAL
CAMERA ID
VIDEO OUT..
DZOOM
MOTION
PRIVACY MASK..
RESET
PREVIOUS PAGE..
OFF
OFF
OFF
①
Select the position where the ID is to be displayed by using the
LEFT and RIGHT buttons.
●
VIDEO OUT
: Move the cursor to select the video system
- VIDEO STANDARD : You can control NTSC / PAL, Video level,
Sync level, Burst level.
MOTION DETECTION
ACTIVITY THR.
MESSAGE TIME
SETUP MOTION ZONE..
PREVIOUS PAGE..
0
25
255
1
3
10
MOTION ZONE SETUP
●
PRIVACY MASK
: Hide an area you want to hide on the screen.
ㆍ
White : MOTION ZONE Position movement
Green : MOTION ZONE Size enlargement
Red : MOTION ZONE Size reduction
ㆍ
For MOTION ZONE Confirm, long press SET button
PRIVACY MASK SETUP
PRIVACY MASK
MASK COLOR
PREVIOUS PAGE..
OFF
WHITE
ENABLE MASKS (1 to 6)
MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
PREV. NEXT.
ON
OFF
OFF
OFF
OFF
OFF
ENABLE MASKS (7 to 12)
MASK 7
MASK 8
MASK 9
MASK 10
MASK 11
MASK 12
PREVIOUS PAGE..
OFF
OFF
OFF
OFF
OFF
OFF
ㆍ
White : PRIVACY-ZONE Position
movement
Blue : PRIVACY-ZONE Size
enlargement or reduction
ㆍ
For PRIVACY-ZONE Confirm, long
press SET button
●
RESET
: Resets the camera.
EXIT MENU
VERSION :
SAVE&EXIT
DEFAULT
CANCEL
7.3.2-7.0.281
EXIT MENU.
●
VERSION
: 7.3.2-7.0.281
●
SAVE&EXIT
: Saves all the setting menus and then exits.
●
DEFAULT
: Resets the camera settings to the factory defaults.
●
CANCEL
: Cancel to the camera settings.
DAY&NIGHT SETUP
NIGHT MODE
TIME DELAY
PREVIOUS PAGE..
BW +burst
BW
COLOR
1
0
255
