24
Chapter 3
KEY Description
s
3.3.1 Key description
s
for
the
C
ontroller
9
Function Key
Buttons
Descriptions
Numeric
Camera ID selection with
Cam
key.
Function number selection with function keys.
(e.g.,
1+Cam, 3+Tour, 5+Scan, 6+Prst
)
Camera
Displays the selected camera on the spot out of the multiplexer and allows the
camera to be controlled by the keyboard controller, if the selected camera is a dome
camera.
Monitor
Camera No.
1~16+Main
display
s
the selected camera full screen
Cancel
Cancels current inputs.
Exits from currently running functions or menu, error status, etc.
Alarm
Disregards all currently activated alarms and turns off the beep temporarily. If alarm
is activated again within the programmed hold time, the timer will restart and beep
again.
Relay ON
Relay No.
1~4+ ON
activate
s
the selected relay.
CUSTOM ON
:
101+ON,102+ON,103+ ON( custom 1,2,3)
Relay OFF
Relay No.
1~4+ OFF
disable
s
the selected relay.
CUSTOM OFF: 101+OFF,102+OFF,103+ OFF ( custom 1,2,3)
Previous
x
Next
x
Home
Menu ESC
Global
Sends all cameras to preset (e.g.,
1, 2… 55 + Enter/Glbl
).
888+Enter/Glbl
: Night shot mode,
999+Enter/Glbl
: Normal mode
Call Preset
position
Pressing Prst bring
s
up the preset programming menu.
Recalls preset; e.g.;
1, 2… 31… 240 + Prst
In the preset or tour programming mode, the operator can review the existing preset
(selected by cursor) by pressing this key.
Tour
Pressing
Tour
bring
s
up the tour programming menu directly.
Recalls programmed presets or functions sequentially. (e.g.,
1 ~ 8+Tour
)
Pattern
Pressing
Ptrn
bring
s
up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g.,
1 ~ 4+Ptrn
)
Auto Scan
Auto Pan
Shift I+ this Auto Tilt
Menu
+
Enters programming menu.
Ctrl+Menu
invoke
s
Keyboard set up menu
No.+Shft+Prst
store
s
current view as a preset directly.
No.+Shft+Tour open
s
programming menu
No.+Shft+Scan open
s
programming menu
Shift/Control
Ctrl+Joystick :
In a programming mode (Preset, Pattern, Scan, Privacy….) the
joystick operates as if in the normal control mode.
While pressing and holding down the
Ctrl
key, all movements of the joystick will start
recording when in the pattern programming menu.
Ctrl+Joystick:
, In normal operation mode, manual speed of the joystick control will
be operated in turbo mode. (Max. speed = 380
º
/sec)
Enter
Completes entering data for the password or title
ENTER+Joystick : Direction key in DVR remote mode or Mux ( PTZ, Mouse,
Cursor)
0 , 1 ~
ESC
