![GenICam ICD FLIR AX5 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/genicam/icd-flir-ax5/icd-flir-ax5_manual_2211780013.webp)
Date
1/6/12
© 2011-2012, FLIR Systems AB. All rights reserved worldwide. Publ. No. T 559 775, Rev. B
13 (20)
2.2.4
FLIR AX5 Camera interface
2.2.4.1
Feature registers
Registers associated with camera features
Name
Type
Access Comment
CameraCapabilities
Integer RO
Camera capabilities. Bit mask.
0=Focus, auto focus single shot
1=Focus, motor
2=Digital I/O capable
3=IRWindowing
SensorSetDefaults
Cmd
WO
Sets all current settings as power on defaults
SensorSetToFactoryDefaults Cmd
WO
Reset camera with factory header values.
SyncMode
Enum RW
External sync feature.The camera provides
the ability to either accept or output a frame
synchronization signal.
0=Disabled (default). The camera will turn
off frame synchronization.
1=SelfSyncMaster. The camera will output a
frame synchronization signal on the Sync
output pin of the GPIO connector.
2=SelfSyncSlave. The camera will accept a
frame synchronization signal on the Sync
input signal on the GPIO connector. The
camera output will be frozen if the camera is
in slave mode and no external
synchronization signal is received.
3=ExtSyncMaster. The camera will accept a
frame synchronization signal on the Sync
input signal on the GPIO connector. The
camera output will be frozen if the camera is
in slave mode and no external
synchronization signal is received. The
camera will output a frame synchronization
signal on the Sync output pin of the GPIO
connector when configured as a Sync master.
BaudRate
Enum RW
Gets or sets the baud rate of the serial comm.
channel. Default is Auto detected.