Genica Portable MP3/CD Player, Руководство пользователя, Страница: 7 / 11

Display Messages
No File
The player did not find any files on the disc
No Disc
The player did not recognize the disc as
valid, or no disc was in the player
ISO-9660 The player detected the disc was in
ISO-9660 format
Stop The player has detected the STOP button
has been pressed or has reached the end
of the disc and is powering down
Sort
The player is sorting the files on the disc
Record
The player is in Record Mode
01 UP
The player is displaying Directory 01, going
UP one level in the tree
01 Down The player is displaying Directory 01, going
DOWN one level in the tree
Dir REC/DIR/FILE has been pressed and the
player is now in DIR mode
File REC/DIR/FILE has been pressed and the
player is now in FILE mode
Making MP3 CDs
DO NOT use Adaptec™ DirectCD or similar UDF formatted
product to create your discs. It is not ISO-9660 compliant!
Discs can be burned in ISO-9660 (8.3 filenames) or Joliet
(Windows long filenames).
It is best to have all the files you plan to burn physically on your hard
drive prior to burning a disc. Burning from other CD-ROMS is possible if
your hardware is fast enough, but it can cause buffer under-runs which
will result in a CD-R creation failure.
It is recommended that any directory structure you wish to have on your
CD is created on your hard drive beforehand, with folders and sub-folders.
These folders can then be dragged into your new Data-CD layout at once.
Be sure you check “Preserve Original File Order” or ensure that it
doesn’t Re-Order files for optimum burn speed or storage. Files
will be played in the order written to the disc, not alphabetically.
Note: The following directions are for Adaptec™ software. Other CD
writer software will work as well. The method will be similar.
Warning: If using NTI CD Maker, directories may appear to have only one file each.
8
Making MP3 CDs (cont.)
Using Adaptec Easy CD-Creator for Windows:
Special notes for version 3.5
When using Easy CD-Creator 3.5 to create discs for this player,
you should always divide the MP3s up evenly in about 3 folders.
There should be no more than 70-80 MP3 files in each folder, to
ensure the player detects them all.
If you are using version 4.0 or higher, the file limitations
above do not apply.
• Open a new Data-CD layout
•
Change the Label name in the left column if you wish
•
Drag the MP3 files (or the folders mentioned on the previous page)
to your Data-CD layout
• DO NOT exceed 650mb of data. The player is not capable of
reading 80 minute/700mb discs containing more than 650mb of
data. The audio will stop after about the first 650mb of songs have
played
• Insert a blank CD-R disc in the CD-Writer unit and close the tray.
• Click on FILE/PROPERTIES in CD-Creator and select the setting
“MODE-1 (CDROM)” DO NOT use Mode-2 (CDROM/XA) as it is not
supported by the player and may result in fewer songs being
detected.
• Ensure that “CLOSE SESSION” is also selected.
• Click the RED icon at the top of the screen (START RECORDING).
For 2x writing, a disc with 650 megabytes will take
approximately 36-40 minutes to complete.
Using Adaptec Toast for Mac:
• Click on the DATA button
• Click the Settings tab
• FORMAT should be CD-ROM ( NOT CD-ROM XA)
• Naming should be ISO-9660 Level 1
• Check Append Version Numbers (;1)
• UNCHECK Use Apple Extensions
• Click the Files tab
• Drag the MP3 files onto the Toast window. If you would rather
have your files in folders, drag the folders onto the Toast window
instead.
• Click DONE and burn the CD
9