GENI MOVING HEAD OBY-5, Руководство пользователя

Страница: 7 / 19

Lamp Installation
Warning
Remove the power cord before installing the lamp.
Keep projector-head upward (See Figure below.) and loosen three
screws on the cover with appropriate tool then open the top cover
and put it aside.
Loosen and grab the screws on the
shutter cover with appropriate tool.
Wear the gloves and extract the lamp from
the package, loosen the screws on both sides of
the lamp, then slide the lamp paralleled into the
lamp socket. Adjust the round point of the
lamp upward (See Figure.) and fasten the
screws snugly.
Reverse the above-mentioned processes for
the complete installation.
5