FL-1800 Golden Strobe Product User Guide
DescriDtion..............................................................
Features..................................................................
Warnina...................................................................
Inspection...............................................................
Settina up................................................................
Manual Control Operation.........................................
Trouble shootina.......................................................
Product Specifications..............................................
Appendix.................................................................
Troubleshooting
Golden Strobe (FL-1800) are designed for years of trouble-
free use. However, incorrect voltage, power surges, or other
mishaps cause problems. The following points are made for
non-technical users. Always refer servicing to qualified
technicians.
Problem: The strobe doesn't flash on manual control.
Action:
!
Check power connections. Plug the mains power cord into
proper power supply socket.
!
Press circuit reset. Retry strobe flash under manual
control.
!
Listen. Is there a tick, tick sound? If so, lamp may be
broken. If not, an electronic component (triac) may need
replacing. Refer servicing to a qualified technician.
Problem: The strobe doesn't flash on remote control.
Action:
!
Disconnect remote control cable. Test strobe under
manual control. Follow instructions above.
!
If strobe flashes in manual control but not under remote
control, replace the remote control cable. Use a cable that
has worked properly with other strobes.
If strobe still doesn't flash under remote control, check to
see if other strobes operate properly with this controller.
Refer servicing of strobe and controller to a qualified
technician.
NOTE: Strobe tubes should be replaced by qualified
technicians only.
Product Specifications
Name: Golden Strobe
Model: FL-1800
Voltage: 230V/50Hz
Power: 2700W
Fuse: NFB 16A
Lamp: ST2000
Dimensions: 460x125x220mm (WxDxH)
Weight: 3 Kg
Remote Trigger: 12VDC positive pulse
Page 1
Page 1
Page 1
Page 2
Page 2
Page 2
Page 3
Page 3
Page 4
3
