Remove dust cap
1. Take the FiberTwist XGS2414 out of the box.
2. The dust cap is connected to the red string located on the rear of the FiberTwist XGS2414.
3. Remove the dust cap by pulling the red string.
4. Store the dust cap in a safe place.
Twist!
1. Place the FiberTwist XGS2414 on the FTU/Bracket as shown in the picture below.
2. Rotate clockwise until it clicks into place.
3. Make sure the FiberTwist XGS2414 is aligned squarely on the FTU/Bracket.
Your FiberTwist XGS2414 is now installed!
