Geneva S, Руководство пользователя

Страница: 4 / 6

4
1. Getting Started
Step 1: Unpack all components from the shipping box. Please save
the original packaging material in case you ever need to return
the system since the Limited Warranty does not cover shipping
damages.
Step 3: Connect the enclosed external telescopic antenna. You
will find the antenna connector in the Geneva Sound System back
panel (see picture below).
Telescopic
Antenna
Table stand
iPhone adapter
The shipping box should contain the following system
components:
iPod dock
Touch panel
ON / OFF key
Display
Step 4: Connect the AC power cable to the AC power plug on the
back panel (see picture). Then connect the other end of the AC
power cable to an AC outlet. „12:00“ will blink on the display,
indicating an invalid time setting.
Power cord
Remote control
Step 2: Remove the protection paper from the remote control
battery compartment.
Line In Antenna connector AC plug
iPod Menu key
Mode selector
Fast reverse / skip
backward
Power On / Off
Play / Pause
Fast forward/skip
forward
iPod control and volume
Touch Panel:
Turn on the Geneva Sound System:
Press the key on the remote control or touch the key on
the touch panel.
How to verify that the remote control works?
Every time a key is pressed on the remote control, a small red light
on the display lights up quickly.
Adjust the clock:
1. Press the key on the remote control. The letter „C“ should
start blinking on the display.
2. Use the and keys on the remote control or the wheel to
set the correct time.
3. Press to complete the procedure.
Note: the clock remains valid for up to 1 hour of power loss.
Treble control
Remote Control:
Bass control
Play / Pause
Fast reverse/
skip backward
FM/
DAB radio presets
Power On / Off
Volume control
Clock control keys
Mode selector
Fast forward/
skip forward