Genesis GBP-ST2000, Инструкция по монтажу

Страница: 8 / 16

MOUNTING TYPE "B" & "C"
MOUNTING "C"
11.
Make sure that the blind is properly mounted (horizontally and
vertically). Tighten the screws in the guides and then insert caps. Check
the correct functioning of the blind. Check the correct operation of
automatic bolts and bolts or lock, adjust if necessary.
13.
Lower the shutter blinds, then the straps or rope should be cut
for a length of 25 cm below the mounting location of the
retractor. After put the rope through the retractor hole, and light
with a lighter, this will prevents it from unraveling the rope. Close
retractor and attach it to the wall. (see assembly instructions
cable retractor).
12.
The retractor should be screwed to the wall or window frame
vertically in relation to the cable outlet from the grommet.
The retractor should be located no more than 1.8 m from the ground.
8
myeuropeanwindows.com