Genesis G90 2017, Руководство пользователя

Страница: 179 / 498

3-93
03
Turn signals and lane change
signals
To signal a turn, move the lever up
for a right turn or down for a left turn
to position (A). The lever will return to
the OFF position when the turn is
completed.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the OFF position when released.
One-touch turn signal function
(if equipped)
To activate an one-touch turn signal
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate/deactivate the One
Touch Turn Signal function or choose
the number of blinking (3, 5, or 7)
from the User Settings mode on the
LCD display. For more information,
refer to "LCD Display" in this chapter.
Information
If the turn signal indicator stays on and
does not blink, or if it blinks abnormal-
ly, a bulb may be burned out or have a
poor electrical connection in the circuit.
The bulb may require replacement.
i
OHI046420L
• Do not place any accessories,
stickers or tint the windshield.
• Have the windshield glass
replaced from an authorized
dealer.
• Do not remove or impact relat-
ed parts of the Smart High
Beam system.
• Be careful that water doesn’t
get into the Smart High Beam
unit.
• Do not place objects on the
dashboard that reflects light
such as mirrors, white paper,
etc. The system may malfunc-
tion if sunlight is reflected.
• At times, the Smart High
Beam system may not work
properly, always check the
road conditions for your safe-
ty. When the system does not
operate normally, manually
change between the high
beam and low beam.
WARNING