Tel: +44 (0)1642 713000
Email: [email protected]
www.genesis-gs.com
UK Head Office & Factory
Stokesley Business Park Stokesley
North Yorkshire TS9 5JZ UK
P.V.C. Trim • Stair Nosings • Movement Joints • Transitions • Entrance Matting• Edge Protection • Metal Profiles • Tactiles• Tools
Step 2: Mounting the correct connector
- Choose the correct connector and fit it
to the main unit [a] using the allan key
provided. [g]
- Hold the main unit and tighten the 2
screws of the connector.
- Release Thumb Screw and open [a]
Main Unit.
- Set the proper Spacer [k, m, n, o] into
the Spindle.
- Set [i] Base Flange on the Spacer
- Set the Blade on [i] Base Flange
- Set the Wheel Nut on the Blade
- Tighten the Wheel Nut
- Confirm NO contact between the Blade
and inner area of [a] Main Unit
[g]
[b,c ,d ,e ,f ]
[a]
Upper flange
blade
[i]
[k, m, n, o]
[b, c, d, e, f]
As M14
[h]
Thumb screw
B334504 Instruction Booklet
[a]
[b, c, d, e, f]
[g]
Thumb Screw
[h]
As M14
Blade
[b, c, d, e, f]
Upper Flange
[k, m, n, o]
[i]
