3
OPERATING INSTRUCTIONS
“ ” ON/OFF KEY
I
. Remote (Fig.7)
“ ” MODE KEY
Repeat press this button, the wind will be switched in order of “normal wind - natural
wind - sleep wind - intelligent wind - normal wind - ... ". Normal wind: The wind speed
is constant set by the wind level, when the "normal wind" icon is lit, 01 - 26 levels are
normal wind; natural wind: Fan will simulate natural wind according to pre-
programmed manner, the wind speed changes in accordance with the program,
which makes people feel more idle as in a nature setting. Smart wind:
Based on the temperature and wind speed when it starts, its speed changes
according to the temperature. When the temperature is below 68°F, the fan stops,
when the temperature rises to 68°F, it continues automatically at the stopped level.
Silent: Fan blows in silent mode; it has a total of nine levels for adjustment.
Plug in the power adapter, after a "beep" tone, the fan is on standby.
Fig.7
Fig.8
On/Off
Drive plate
OSC
Mode
PRO/Timer
Remote
Battery
Battery cover
Fig.4
Fig.5
Fig.6
GRILL & FAN BLADE ASSEMBLY
1. Unscrew the spinner clockwise (or take the spinner out from the bag) and the
plastic nut counterclockwise to remove both of them. Fix the rear grill to the
motor then tighten the plastic nut again. (Fig.4)
2. Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove
of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig.5)
3. Fix the front grill and the rear grill with circlip clip and then use the fasten clip to
tighten the fan grill. (Fig.6)
Press this button while in standby mode, the fan will start at normal wind of level 10,
then the panel displays "normal wind, level 10". Press this button while operating,
the fan will turn off to standby mode.
After starting, rotate the drive plate clockwise, the fan increases from the current
level circulation in the following manner: ...... silent 01 → silent 09 → normal wind
01 →...... → normal wind 26 → natural wind → sleep wind→ smart wind → silent 01
→ ...... , rotate the drive plate counterclockwise, the fan will decrease from the
current level in the following manner: ...... smart wind → sleep wind → natural wind
→ normal wind 26 → ...... → normal wind 01 → silent 09 → silent 01 → smart wind
→ ......