![Genesis 7.1 Petite Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/genesis/7-1-petite/7-1-petite_owners-manual_2211370004.webp)
ver 1.0
4
44
4
~ÄëçäìíÉ=ÑáÇÉäáíó
1 A Quick Start Set-up Guide
Now that you have your new Genesis 7.1 Petite (G7.1p), we realize that
you can’t wait to hook it up and start playing! However, please read this
quick set-up guide (even if your dealer is setting it up for you) before you
proceed.
1.1 Unpacking
Your loudspeakers will come to you in two shipping cartons weighing
over 28 lbs (12.7 kgs) each. Care must be taken when moving the
carton around, and taking the speaker out of the box. While the speaker
is small, it is also slippery and heavy.
We will
not
be held liable for damage to either the speakers or your
backs during unpacking and setting up. Be careful as you may
inadvertently damage the drivers if the cabinet slips and you grab at it
and put a finger into the woofers. Do not try to lift the cabinet by the
shield (it is not a handle!) or by grabbing the woofers as handles.
1.2 Placement
As a stereo pair of speakers, a good starting position for your G7.1p
is at least 18 inches (45cm) into the room as measured from the front
wall (the wall you look at as you are seated listening to the speakers) to
the back of the speakers. Place the speakers vertically on a stand that is
at least 20 inches high, and about five feet (1.5 metres) apart. Toe the
speakers in very slightly towards the listeners – by about 3 to 5 degrees
– no more.
You will want to sit seven to ten feet (2.5 to 3.5 metres) away from the
speakers. When sitting further away, you should place the speakers
further apart. When sitting nearer the speakers, move the speakers
closer together.
If you are using the G7.1p as surround or rear speakers, and you are
hanging them on the wall, you will need a qualified installer to mount
them on very strong brackets. The speakers weigh over 24 pounds
(10.9 kgs) each, and can cause death or severe injury if it falls on
someone’s head!
1.3 Connections
The speakers should be connected directly to the speaker-level output
of your power amplifiers using high quality speaker cables and the 5-
way binding posts.