Generalmusic Promega 2, Руководство пользователя

Страница: 36 / 47

Generalmusic Promega2 Page33
TYPE 1: Footswitch with normally closed contacts.
TYPE 2: Footswitch with normally open contacts.
TYPE 3. Continuous or “volume” type pedal.
Other instruments offer a separate menu where you have to tell the system which type of
pedal has been connected. With the Promega , you don’t have tell the system anything
because the instrument works it all out for you.
Once the instrument has ascertained which types of pedal are connected, it then configures
the CONTROL menu with appropriate options for each pedal. For example, if you have
connected a footswitch to one of the pedal jacks then this cannot be used as a volume
control so there is no need to see the “VOLUME” option for that pedal. Similarly if you
connect a continuous pedal to one of the jacks, it cannot be used to switch between
performances so there is no need for this option to be offered.
When you select either the DAM, PD1 or PD2, the EFFECTS section display will show the
current function of that pedal. Refer to the charts below to interpret the three-letter abbreviations
used for each function. You may select a different function by moving the LEVEL slider in the
EFFECTS section. Also, for greater accuracy in selecting precise values, the /- buttons
are configured in this mode to increment or decrement the value by 1.
The following charts show the options which are available for each different type of pedal.
FUNCTION DISPLAY SHOWS DESCRIPTION
Volume vOL Internal section volume
Expression Epn Internal section Expression
Filter FIL Internal section Filter
Pan PAn Internal section Pan
Wha UHA PRO EFX Wha – realtime pedal control
Midi continuous controllers from 119 to 0.
The controller will be sent via MIDI OUT on
the related channel of each assigned section.
119-0, (display shows
each number) **
Mid
controllers
119 – 0*
CONTINUOS PEDAL and MOD WHEEL
* The MIDI CONTINUOUS CONTROLLER family is an industry standard set of controllers which
can be used to remote control various parameters inside other synthesizers and sound modules.
Only certain controller numbers will work on each piece of equipment. Refer to the MIDI
IMPLEMENTATION CHART of your synth or sound module to see which controllers are recognized.
**Not every number from 119 to zero is displayed. Certain numbers in the MIDI CONTINUOUS
CONTROLLER family are not available here. The numbers not displayed are on/off functions
used to control features which do not lend themselves to a continuous pedal, (like Controller#64,
Damper/Hold). These functions will be available if you insert a footswitch instead of a continuous
pedal. See the back section of this manual for a list of all MIDI CONTINUOUS CONTROLLERS
and their functions.
FUNCTION DISPLAY SHOWS DESCRIPTION
Section On/Off SEC Switches the assigned section on or off
Performance - Pdn
Perfo PuP
Soft SOF Piano Soft pedal function
Sostenuto SOS Piano Sostenuto function
FOOTSWITCH (either type)
Selects the previous performance to the
currently selected one.
Selects the next performance after the
currently selected one.