Generalmusic GK 330, Руководство пользователя

Страница: 21 / 34

GK330 17
Play on, the voices recalled for the Upper and Lower sections will be Organ 2 and
Strings respectively.
You only need to change one aspect of any factory setting to be able to save the new
setting as a new Performance. In our example, let’s change the voice assigned to
the Voice 1 section.
1. Press the [STYLE] button, press the [S.T.PLAY] button, then select Style n. 45
(Swing).
2. Press the [VOICE] button and select a different Voice by using either the [+] and
[–] buttons, or the numeric keypad (voice 27, Jazz Guitar, in the example).
3. Deactivate the Single Touch Play function (press the [S.T.PLAY]).
4. Hold down the [STORE PERFORMANCE] button and simultaneously press one
of the PERFORMANCE buttons [P1] - [P6]. For example, if you press [P5]:
The small black arrowhead at the bottom of the display will show the current
Performance.
Whatever information was previously stored in the selected button will be erased
by the new data.
5. At this point, you can check if your new Performance has been stored. Chang-
ing the panel situation (for example, select a Voice or Style), then press the
PERFORMANCE button that you used to store your Performance in point 4 above.
Panel Reset - Restore Performance
A very quick and simple way of restoring all the original factory Performance settings
is by means of the PANEL RESET operation. This operation cancels all user-pro-
grammed settings.
Turn the instrument off, then while holding down both ends of the [Tempo+/– ] but-
ton turn the instrument on again. Now release the Tempo +/– buttons. All the user-
programmed settings will be cancelled and the factory settings will be restored. You
will note that the display will return to the power-up setting.
The Sequencer
Your GK330 contains a very simple and easy-to-use sequencer which records
whatever you play and plays back the recorded sequence just as you played it.
You can record in Voice mode or Style mode with one or two melody tracks. In
playback, you can play along with the recorded sequence using different voices
to those used in the Melody tracks. The following example explains how to
record a sequence using the Accompaniments and one of the Melody tracks
(Melody 1).
1. Set the instrument for Style play and select a Style.
(Follow the instructions explained on page 9).
2. Press the [RECORD] button.
The LED of the [RECORD] button will start to flash and the KEY START function
will activate automatically (the four Beat indicators in the display will flash).
3. Press the [ACCOMP] button followed by the [MELODY 1] button. This will allow
you to record a melody line with automatic accompaniments.
The LEDs of the [ACCOMP] and [MELODY 1] buttons will start to flash to indi-
cate that the tracks are ready to record notes.
Flashing Beat indicators