15
Once you have played out a few feet of probe, lock the
reel by fastening the Velcro closure around the reel
frame, as shown at right.
You can now attach the 2 in. spherical ring, the 4 in.
brush set or the 6 in. brush set to the probe tip.
To
attach the ring
, slide its slightly larger open end over
the camera head (it fits only one way) until the head
protrudes about 1/8 in. past the ring’s other opening.
In this position, the ring’s Allen set screw will line up
with the Accessory mounting ring of the camera head
(see Fig. 3). Secure the ring to the head by using the
included Allen wrench to tighten the screw, as shown
at right.
To attach either probe-centering brush set
, identify
the end with three set screws. Passing the camera
head through the
other
end first, slide the probe
through the brush set until the camera head protrudes
1/8 in. past the end with the set screws (see figures
below). In this position, the three set screws will line up with the head’s Accessory mounting ring.
Secure the brush set to the head by hand-tightening the screws.
✓
Screw holes