OPERATING INSTRUCTIONS
QUICK START PROCEDURE
1. Press and hold the
button for at least 3 seconds to power on the
scope and illuminate the LCD.
2. Press the
button to increase the brightness of the camera’s LEDs
3. Press the
button to decrease LED brightness
4. Press the
button to flip the video (rotate it 180°). Press the button
again to undo the inversion.
5. Press the
button to enlarge the video frame. The first press of the
button enlarges the frame 20%, corresponding to a zoom level of 1.2X.
“X 1.2” will appear in yellow at the bottom right of the screen. Push the
button again to zoom in closer at a level of 1.4X, 1.6X, 1.7X, 1.8X,
1.9X or 2.0X. The next push of the
button reverts to normal size
(1X) viewing.
Because the probe is flexible-obedient, you can maneuver it into various positions
to aim at different targets and it will hold its shape. To protect the camera-tipped
end of the probe, reinstall the black rubber lens cap after each inspection session.
The DCS312 is designed to be powered for several hours by the same set of four
“AA” batteries. To replace the batteries, follow the procedure on p. 5 of this manual.
SPECIFICATIONS
Display Size/Type
3.5 in. (89mm) diagonal TFT color LCD
Display Resolution
320 x 240 pixels
Monitor Controls
180° flip, 1X to 2X zoom in 7 steps,
brig and –
Probe Diameter & Type
12mm (0.47 in.) flexible-obedient
Probe Length
1m (39 in.)
Probe Field of View
60°
Probe Depth of Field
4 in. to 8 ft. (102 mm to 2.4m)
Camera Light Source
4 adjustable-brightness white LEDs
Impact Resistance
To height of 1m (39 in.)
Water, Dust, Oil Resistance Levels
Camera-tipped probe: IP67
Grip and monitor: monitor: IP54
Video Out Format/Cable Length
NTSC/3.94 ft. (1.2m)
Battery Life
>3 hours (typical)
7
