General 10-300, Руководство по установке и эксплуатации, Страница: 6 / 16

FILTRATION SYSTEM
This wet dry vacuum is designed with 2 stage air filtration comprised of a filter bag and a pleated inner filter
cartridge. To ensure maximum performance and to protect the motor against dust infiltration make sure that the fil-
tration is properly installed and used at all times.
1. When vacuuming dry trash or dust, both the filter bag and the pleated inner filter cartridge should be installed.
2. When vacuuming wet trash or liquids, remove the pleated inner filter cartridge as only the filter bag is needed.
TURN OFF THE UNIT AND UNPLUG THE POWER CORD BEFORE REMOVING OR INSTALLING THE FILTERS.
WARNINGS FOR OPERATING
1. Do not use to vacuum up gasoline, or other flammable liquids or vapors. Also avoid using
for nails, blades, screws or other sharp objects that could damage the hose or perforate
the filter bag.
2. The airflow indicator will pop up when air is flowing unrestricted and the unit is func-
tioning properly. If the air flow indicator does not pop up, there may be an obstruction or
the tank may be full: in this case, stop the unit and check or empty the unit as necessary.
(Model 10-300 only)
3. To avoid the build up a strong smells inside the tank, clean and empty the unit after each
use or before storing for prolonged periods.
4. Do not use the unit near sources of heat such as ovens, radiators or space heaters. Exposure
to heat may cause the tank to buckle, bulge or lose its shape preventing a good seal
between the tank and lid which will diminish performance and suction efficiency.
5. To avoid the build-up of static electricity in the extension wand, do not suck up too much
fine dust at one time.
6. To prevent damage to the motor, before operating, make sure that the filter bag is in place,
properly fitted and is not perforated. Periodically inspect the filter bag for holes or perfora-
tions. The filter bag should be replaced immediately if damaged or perforated.
ITEM #10-323
PROFESSIONAL
WET NOZZLE
Used for water removal.
ITEM #10300-35B
WET NOZZLE
Used for water removal.
ITEM #10-314
12” BRUSH NOZZLE
Used on floors or carpets.
ITEM #10-310
CREVICE
NOZZLE
Used in corners or
tight spaces.
ITEM #10300-11B
ROUND BRUSH
NOZZLE
Used on fabric or any
irregular surface.
ITEM #10-306
FLEXIBLE
6’ HOSE
ITEM #10-309
2 PIECE
EXTENSION WAND
ITEM #10-332
PLEATED FILTER
CARTRIDGE
ITEM #10-334
CLOTH FILTER BAG
REFERENCE GUIDE FOR REPLACEMENT & OPTIONAL ACCESSORIES
OPTIONAL
18’ FLEXIBLE HOSE
ITEM #10-318
6